14.95 NEXT Without FOR Statement Syntax Error in DATA or ISAM SEEK Statement RETURN Without GOSUB Statement Out Of DATA During READ Statement Illegal Function Call--Improper or Out-of-Range Argument; Too Large String Arithmetic Overflow in Floating Point Calculation or ISAM Table Out Of Memory During File Buffer Allocation or in DGROUP Undefined Label or Line Number Subscript Out Of Range; Small Array >64K; or Wrong Number Duplicate Array/CONST Definition, Redimensioned Array, File Already Exists Division By Zero; Zero To Negative Power; -32,768 Divide or Modulo Error Statement Illegal in Direct Mode String/Numeric Type or Storage Size Mismatch or ISAM Error Out Of String Space in Memory String Expression Too Long or Complex; INPUT Has More Than 15 Variables Cannot Continue Function not Defined With DEF FN No RESUME During Error Handling RESUME Encountered And No Error Condition Exists Input/Output Device Time Out (No Response) Hardware Device Fault (Failure) FOR Without NEXT Statement Printer is Off or Out Of Paper WHILE Without WEND Statement WEND Without WHILE Statement Duplicate Statement Label Subprogram not Defined Subprogram Argument Count Mismatch With DECLARE Statement Array is not Defined Variable is Required on GET or PUT on BINARY Mode File FIELD Allocation of More Bytes Than Specified in OPEN Statement Internal Error From Compiler--Recopy Disk/Check Hardware File Name or Number is Bad or Out Of Range/not Open Requested File not Found on RUN/KILL/NAME/FILES/OPEN Statement Improper File Mode/Invalid Use Of GET/PUT/FIELD/PRINT/INPUT/OPEN Statement File Already Opened Sequentially on Output or KILL on Open File GET or PUT Executed on Record Variable When FIELD is Active Unrecoverable Device Input/Output Error File in NAME Command Already Exists GET or PUT on Record Variable Causes Record LENGTH Mismatch Against OPEN Disk or Diskette is Full (Space Exhausted) on PRINT/WRITE/CLOSE Input Past End-Of-File on INPUT # Invalid (Non-Positive) Record Number on GET/PUT Statement Invalid File Name Format in LOAD/SAVE/KILL/OPEN Statement More Files Open Than CONFIG.SYS Allows or Root Too Large on SAVE/OPEN Device Unavailable (not Online or Nonexistent) Communications Receive Buffer Overflow Disk is Write Protected or File is Locked--Permission Denied Disk not Ready (No Disk in Drive or Door is Open) Disk Hardware or Physical Media Fault Advanced Feature is Unavailable or Has Been Disabled Can't Rename File Across Drives Path/File Access Error on OPEN/RENAME/MD/CD/RD Statement Path not Found on OPEN/MD/CD/RD Statement or Output File is Read-Only Feature Has Been Removed By Compiler or Linker Option Specifications ISAM Object Name >30 Characters or Not Alphanumeric ISAM DELETEINDEX On Nonexistent Table ISAM DELETEINDEX/SETINDEX--Index Not Found ISAM Element Name Must Be Column Name; Data Doesn't Exist; Can't Be Indexed ISAM No Current Record on DELETE/RETRIEVE/UPDATE/MOVENEXT/MOVEPREVIOUS ISAM Duplicate Column Value for Unique Index; CREATEINDEX w/non-zero arg ISAM MOVELAST or SEEK on Null Index ISAM Database Needs Repair--Use REPAIR.EXE ISAM Insufficient Buffers Mach 2 or QB/Pro (Non-Critical)--Invalid Function Number or Operation Mach 2 or QB/Pro (Non-Critical)--File or Record not Found Mach 2 or QB/Pro (Non-Critical)--Path not Found or Records not Sorted Mach 2 or QB/Pro (Non-Critical)--Too Many Open Files; No Handles Left Mach 2 or QB/Pro (Non-Critical)--Access Denied Mach 2 or QB/Pro (Non-Critical)--Invalid Handle Mach 2 or QB/Pro (Non-Critical)--Memory Control Blocks Destroyed Mach 2 or QB/Pro (Non-Critical)--Insufficient Memory Mach 2 or QB/Pro (Non-Critical)--Invalid Memory Block Address Mach 2 or QB/Pro (Non-Critical)--Invalid Environment Mach 2 or QB/Pro (Non-Critical)--Invalid Format Mach 2 or QB/Pro (Non-Critical)--Invalid Access Code Mach 2 or QB/Pro (Non-Critical)--Invalid Data Mach 2 or QB/Pro (Non-Critical)--Invalid Drive Mach 2 or QB/Pro (Non-Critical)--Attempt to Remove Current Directory Mach 2 or QB/Pro (Non-Critical)--not the Same Device Mach 2 or QB/Pro (Non-Critical)--No More Files Mach 2 or QB/Pro (Non-Critical)--Disk is Write Protected Mach 2 or QB/Pro (Non-Critical)--Unit is Unknown Mach 2 or QB/Pro (Non-Critical)--Drive is not Ready Mach 2 or QB/Pro (Non-Critical)--Unknown Command Mach 2 or QB/Pro (Non-Critical)--Data Error (Cyclical Redundancy Check) Mach 2 or QB/Pro (Non-Critical)--Bad Request Structure Length Mach 2 or QB/Pro (Non-Critical)--Disk Seek Error Mach 2 or QB/Pro (Non-Critical)--Unknown Media Type Mach 2 or QB/Pro (Non-Critical)--Disk Sector was not Found Mach 2 or QB/Pro (Non-Critical)--Printer is Out of Paper Mach 2 or QB/Pro (Non-Critical)--Write Fault Mach 2 or QB/Pro (Non-Critical)--Read Fault Mach 2 or QB/Pro (Non-Critical)--General Failure Mach 2 or QB/Pro (Non-Critical)--Sharing Violation Mach 2 or QB/Pro (Non-Critical)--Lock Violation Mach 2 or QB/Pro (Non-Critical)--Invalid Disk Change Mach 2 or QB/Pro (Non-Critical)--File Control Block is Unavailable Mach 2 or QB/Pro (Non-Critical)--Sharing Buffer Overflow Mach 2 or QB/Pro (Non-Critical)--Network Request is not Supported Mach 2 or QB/Pro (Non-Critical)--Remote Computer is not Listening Mach 2 or QB/Pro (Non-Critical)--Duplicate Name on Network Mach 2 or QB/Pro (Non-Critical)--Network Name was not Found Mach 2 or QB/Pro (Non-Critical)--Network is Busy Mach 2 or QB/Pro (Non-Critical)--Network Device No Longer Exists Mach 2 or QB/Pro (Non-Critical)--Network BIOS Command Limit Exceeded Mach 2 or QB/Pro (Non-Critical)--Network Adapter Hardware Error Mach 2 or QB/Pro (Non-Critical)--Incorrect Response From Network Mach 2 or QB/Pro (Non-Critical)--Unexpected Network Error Mach 2 or QB/Pro (Non-Critical)--Incompatible Remote Adapter Mach 2 or QB/Pro (Non-Critical)--Print Queue is Full Mach 2 or QB/Pro (Non-Critical)--not Enough Space For Print File Mach 2 or QB/Pro (Non-Critical)--Print File Deleted Mach 2 or QB/Pro (Non-Critical)--Network Name Deleted Mach 2 or QB/Pro (Non-Critical)--Access Denied Mach 2 or QB/Pro (Non-Critical)--Network Device Type is Incorrect Mach 2 or QB/Pro (Non-Critical)--Network Name not Found Mach 2 or QB/Pro (Non-Critical)--Network Name Limit is Exceeded Mach 2 or QB/Pro (Non-Critical)--Network BIOS Session Limit is Exceeded Mach 2 or QB/Pro (Non-Critical)--Temporarily Paused Mach 2 or QB/Pro (Non-Critical)--Network Request was not Accepted Mach 2 or QB/Pro (Non-Critical)--Print/Disk Redirection Paused Mach 2 or QB/Pro (Non-Critical)--File Already Exists Mach 2 or QB/Pro (Non-Critical)--Cannot Make Directory Entry Mach 2 or QB/Pro (Non-Critical)--Interrupt 24H Failure Mach 2 or QB/Pro (Non-Critical)--Too Many Redirections Mach 2 or QB/Pro (Non-Critical)--Duplicate Redirection Mach 2 or QB/Pro (Non-Critical)--Invalid Password Mach 2 or QB/Pro (Non-Critical)--Invalid Parameter Mach 2 or QB/Pro (Non-Critical)--Network Device Fault Stay-Res--Requested Service is not Valid in TSR Mode Stay-Res--DOS is Busy so DOS Services are not Available Stay-Res--Not Enough Real DOS Memory To Become Memory-Resident Stay-Res--Unable To Become Memory Resident Stay-Res--DOS Version Earlier Than 3.0 Is Not Supported Stay-Res--MEMORY HOPELESSLY CORRUPTED !!! REBOOT NOW!!! Stay-Res--Must Be Highest Program In Memory For Successful Removal Stay-Res--Primary Hot Key is Invalid or is not Defined Stay-Res--Insufficient EMS Memory Available Stay-Res--Swap File Initialize--Bad File/Path Name or Not Enough Space Stay-Res--Unprogrammed Error on SHELL Stay-Res--Stay-Res Object Module STAYQB4.OBJ was not LINKed 1st Stay-Res--SrResidentShell or Batch Command Cannot Be Null Mach 2 or QB/Pro EMS--Internal Error in Expanded Memory Mgmt Software Mach 2 or QB/Pro EMS--Malfunction in Expanded Memory Mgmt Hardware Mach 2 or QB/Pro EMS--Invalid Expanded Memory Handle Mach 2 or QB/Pro EMS--Undefined Operation Mach 2 or QB/Pro EMS--No More Handles are Available Mach 2 or QB/Pro EMS--Error in Save or Restore of Mapping Context Mach 2 or QB/Pro EMS--No More Memory Pages are Physically Available Mach 2 or QB/Pro EMS--No More Memory Pages are Logically Available Mach 2 or QB/Pro EMS--Zero Memory Pages were Requested Mach 2 or QB/Pro EMS--Invalid EMS Page for this EMS Handle Mach 2 or QB/Pro EMS--Invalid EMS Page in Range 0-3 Mach 2 or QB/Pro EMS--Page-Mapping Hardware State Save Area is Full Mach 2 or QB/Pro EMS--Save of Map Context Failure; Context Saved Mach 2 or QB/Pro EMS--Restore of Map Context Failure; Context not Saved Mach 2 or QB/Pro EMS--Sub-Function Parameter not Defined Mach 2 or QB/Pro (Critical)--Attempt to Write on Write-Protected Disk Mach 2 or QB/Pro (Critical)--Unknown Unit or Window Manager not Init'd Mach 2 or QB/Pro (Critical)--Drive or Device not Ready or Invalid Buffer # Mach 2 or QB/Pro (Critical)--Unknown Command or Empty Buffer Mach 2 or QB/Pro (Critical)--CRC Data Error or Window Buffer Order Error Mach 2 or QB/Pro (Critical)--Bad Request Structure Length or Insuff Memory Mach 2 or QB/Pro (Critical)--Disk Seek Error Mach 2 or QB/Pro (Critical)--Unknown Media Type Mach 2 or QB/Pro (Critical)--Disk Sector was not Found Mach 2 or QB/Pro (Critical)--Printer is Out of Paper Mach 2 or QB/Pro (Critical)--Device Write Fault or Invalid Function # Mach 2 or QB/Pro (Critical)--Device Read Fault or Wrong Screen Position Mach 2 or QB/Pro (Critical)--General Failure Mach 2 or QB/Pro (Critical)--Invalid Disk Change
